CONTI-V MULTIBELT Banded V-Belts
CONTI-V MULTIBELT banded V-belts are created by joining individual V-belts into one wide strip. The belt profile and transmitted power remain the same as the individual belts.
The banded V-belts are used to eliminate vibrations in the individual belts, on drives with significant impacts as well as highly irregular loads and on drives with large center distances.
Low electrical conductivity – for compliance with requirements to ISO 1813.
CONTI-V MULTIBELT (Narrow, ISO/DIN)
Banded V-belts in narrow SPZ, SPA, SPB and SPC profiles.
Low electrical conductivity – for compliance with requirements to ISO 1813.
CONTI-V MULTIBELT (Narrow, RMA/MPTA USA)
Banded V-belts in narrow 3V/9J, 5V/15J and 8V/25J profiles.
Low electrical conductivity – for compliance with requirements to ISO 1813.
CONTI-V MULTIBELT (Classic, ISO/DIN)
Banded V-belts in classic A/HA, B/HB, C/HC and D/HD profiles.
Low electrical conductivity – for compliance with requirements to ISO 1813.
CONTI-V MULTIBELT ADVANCE (Reinforced)
Reinforced banded V-belts in narrow SPZ, SPA, SPB and SPC profiles for high power transmission.
Low electrical conductivity – for compliance with requirements to ISO 1813.
CONTI-V MULTIBELT POWER (Reinforced)
Reinforced multiple V-belts in narrow SPB and SPC profiles for transmission of the highest performances.
Low electrical conductivity – for compliance with requirements to ISO 1813.
CONTI-V MULTIBELT FO (Toothed)
Reinforced banded V-belts in narrow XPZ, XPA, XPB, 3VX, and 5VX profiles with internal teeth. Designed for high power transmission
Low electrical conductivity – for compliance with requirements to ISO 1813.
CONTI VX TORQUE TEAM ADVANCE (EPDM)
Reinforced banded V-belts made of EPDMSynthetic Ethylene Propylene Diene Monomer rubber compound in narrow XPB, 3VX/9JX, and 5VX/15JX profiles with internal teeth. Designed for maximum power transmission and the highest temperature resistance (formerly CONTI-V MULTIBELT FO ADVANCE)
Products
-
V-Belts
-
Drive (Endless)
- Single
- Banded
- Double-Sided
- Twisted
- Special
- Open-Ended
- Automotive
- Lawn and Garden
-
Drive (Endless)
- Poly-V-Belts
-
Timing Belts
-
Drive (Endless)
- HTD
- STD (STS)
- Inch Sizes
- Double-Sided
- CONTI SYNCHROFORCE
- BANDO CEPTOR
- BANDO HP
- CONTI FALCON PD
- CONTI SILENTSYNC
- CONTI SYNCHROCHAIN CARBON
- CONTI SYNCHROCHAIN SUPREME
- BANDO KING POWER
- CONTI SYNCHROFLEX
- CONTI SYNCHROFLEX GEN III
- BANDO BANCOLLAN
- CONTI SYNCHROMOTION
- CONTI SYNCHRORIB
- CONTI SYNCHROCOLOR
- Linear (Open-Ended)
-
Conveyor
By type of connection and fastening
- Lawn and Garden
-
Drive (Endless)
- Pulleys
- Locking Bushes and Hubs
-
Chains
-
Drive Chains
-
Roller Chains (B-Series - DIN 8187)
- 04-1 (6 × 2.8 mm)
- 05B (8 × 3 mm)
- 06B (3/8″ × 7/32″)
- 08B (1/2″ × 5/16″)
- 10B (5/8″ × 3/8″)
- 12B (3/4″ × 7/16″)
- 16B (1″ × 17 mm)
- 20B (1 1/4″ × 3/4″)
- 24B (1 1/2″ × 1″)
- 28B (1 3/4″ × 1 1/4″)
- 32B (2″ × 1 1/4″)
- 40B (2 1/2″ × 1 1/2″)
- 48B (3″ × 1 3/4″)
- 56B (3 1/2″ × 53.34 mm)
- 64B (4″ × 60.96 mm)
- 72B (4 1/2″ × 68.58 mm)
- Corrosion-Resistant Chains (B-Series - DIN 8187)
- Reinforced Chains (B-Series - DIN 8187)
- Reinforced and Corrosion-Resistant Chains (B-Series - DIN 8187)
- Maintenance-Free Chains (B-Series - DIN 8187)
- Stainless Steel Chains (B-Series - DIN 8187)
-
ASA/ANSI Chains (A-Series - DIN 8188)
- 04C / ASA 25 (1/4″ × 1/8″)
- 06C / ASA 35 (3/8″ × 3/16″)
- 08A / ASA 40 (1/2″ × 5/16″)
- 10A / ASA 50 (5/8″ × 3/8″)
- 12A / ASA 60 (3/4″ × 1/2″)
- 16A / ASA 80 (1″ × 5/8″)
- 20A / ASA 100 (1 1/4″ × 3/4″)
- 24A / ASA 120 (1 1/2″ × 1″)
- 28A / ASA 140 (1 3/4″ × 1″)
- 32A / ASA 160 (2″ × 1 1/4″)
- 40A / ASA 200 (2 1/2″ × 1 1/2″)
-
Roller Chains (B-Series - DIN 8187)
- Chains with Attachments
- Leaf and Hoisting Chains
- Conveyor Chains
-
Drive Chains
-
Sprockets and Plate Wheels
- Plate Wheels without Hub (B-Series - DIN 8187)
- Sprockets with Hub (B-Series - DIN 8187)
- Sprockets with Hub and Hardened Teeth (B-Series - DIN 8187)
- Sprockets with Finished Bore, Hub, and Hardened Teeth (B-Series - DIN 8187)
- Sprockets for Taper Lock Bushes (B-Series - DIN 8187)
- Sprockets for Taper Lock Bushes with Hardened Teeth (B-Series - DIN 8187)
- Double-Single Sprockets for 2 Chains (B-Series - DIN 8187)
- Double-Single Sprockets for 2 Chains and Taper Lock Bushes (B-Series - DIN 8187)
- Stainless Steel Sprockets with Hub (B-Series - DIN 8187)
- ASA/ANSI Sprockets (A-Series - DIN 8188)
- Custom Made
- Spur Gears and Racks
- Shaft Couplings
- Flat and Conveyor Belts
- Lifting Belts and Ropes
- PTFE Foils and Belts
- Damping Elements and Buffers
- Bearings and Linear Technology
- Accessories
- Excess Inventory Sale
Even Better Prices!
A 2% discount is applied to current price list when ordering from our eshop.
Free shipping when ordering
to a Czech address for more than 80 €.
