XPB 1270 Ld (5VX 505) CONTI-V FO PIONEER
V-Belt
Low electrical conductivity – for compliance with requirements to ISO 1813.
The trendsetters with less polycyclic aromatic hydrocarbons (PAH) for clean operation and protection of persons in case of long-term contact with the belt.
Price without VAT: 443,60CZK
Price including VAT: 536,80CZK with VAT
Catalogue price excluding VAT:
452,00CZK
Sale is Over The goods are sold out and their sale has been ended. Therefore, it will not be available in the future, so it cannot be ordered.
Belt Parameters
Nominal length, datum length or working length of the belt. It is commonly denoted as Ld or Ld, and sometimes also as Lw or Lw.
Outside length of the belt. It is commonly denoted as La or La.
In the TYMA Product Catalogues you can find this material also described with the abbreviation EPDM.
Belt Description
XPB 1270 Ld (5VX 505) CONTI-V FO PIONEER is a narrow V-belt with internal teeth for permanent and reliable transmission of the highest power and revolutions in XPB profile cut according to ISO 4184 (DIN 7753), but also corresponding to the 5VX profile according to the US RMA/MPTA IP-22 standard and the 15XN profile according to other manufacturer's markings.
The belts are made of highly durable and fiber-reinforced EPDM rubber compound with a temperature resistance up to 130 °C and polyester tensile member. Their optimized flanks provide better friction ratio and up to 3 times higher performance than conventional belts.
XPB 1270 Ld (5VX 505) CONTI VX ADVANCE V-Belt is the Successor of XPB 1270 Ld (5VX 505) CONTI-V FO PIONEER
The Continental CONTINUITY project is unifying the belt names and performance series globally across the entire ContiTech portfolio.
Therefore, the blue narrow V-belt for top performance made of EPDM and sold under the name XPB 1270 Ld (5VX 505) CONTI-V FO PIONEER has been fully substituted by the black narrow EPDM belt XPB 1270 Ld (5VX 505) CONTI VX ADVANCE with a new printing design.
CONTI-V FO PIONEER Changes to CONTI VX ADVANCE
The top-performance EPDM V-belts known for their blue design are now available in a black design with the new name.
Technically and performance-wise, these belts are unchanged. The materials used remain the same. There is no need to change the machine construction, the mounting method, the preload setting or the operating method.
In the Eshop offer we of course differentiate between blue and black versions of EPDM belts. You can therefore recognize them simply by the picture and the name.
Belt Construction
- Fiber-reinforced EPDM rubber bottom section
- Embedding compound
- Polyester tension member
- Cotton-polyester cover fabric with EPDM finish
Belt Fields of Use
The CONTI V FO PIONEER heavy-duty V-belts of the XPB/5VX profile meet the strongest requiremets of modern drive technology and are used in all areas of mechanical engineering.
Typical application fields include compressors, blowers, machine tools, the paper and chemical industries and many other machines.
Belt Characteristics
- Highest power transmission (up to 3 times higher than conventional V-belts)
- High peripheral speed up to 50 m/s (conventional only up to 30 m/s)
- Can be used in larger installations with greater center distances
- Length range up to 6.85 m
- L = L design – constant tolerance of belts in the set, minimum elongation
- Use with standardised SPB pulleys
- Temperature resistant from −40 °C to +130 °C (sheathed belts only up to +70 °C)
- Antistatic according to ISO 1813
- Maintenance-free, improved durability thanks to abrasion-resistant compound
- Low in PAHs – category 2 according to AfPS-GS-2014-01-PAK
Belt Certification
- Factory Electrical Conductivity Certificate of Belts According to ISO 1813 and ISO 9563 (pdf, 104.90 kB)
- ContiTech Explanation of ATEX Certification (pdf, 11.96 kB)
Notice
General factory certificates are not sufficient for belts used in potentially explosive atmospheres.
If a test report according to ISO 1813 and ISO 9563 is required for the application, it is necessary to inform us of the request for delivery of belts including the certificate when ordering them (when ordering belts via Eshop, please write this request in the "Note" field before by sending the order). The certificate is issued by ContiTech after the test in the production plant.
Documents for Download
Dimensions and Parameters of CONTI-V FO PIONEER XPB/5VX and XPC V-Belts
TYMA CZ Data Sheets
Czech and English (PDF 161.60 kB)
Rubber Products Optional Services Price List
TYMA CZ Product Overview
Czech and English (PDF 500.38 kB)
Related Products
Low electrical conductivity – for compliance with requirements to ISO 1813.
CONTI V SUPREME SPB V-Belts
SPB Taper Lock V-Belt Pulleys
Taper Lock Bushes
Taper Lock bushes with finished metric or inch bore and keyway to fixing components to a mating shaft without using any special tools.
Measuring Instruments
Our professional-quality special tools and measuring instruments will assist you in maintaining and fitting drive components.
Belt Manufacturer Profile
Continental is the world’s largest specialist for rubber and plastics technology in the non-tire rubber sector. A division of Continental AG, the company develops and produces functional parts, components and systems for the automotive and other important industries.
ContiTech importance on immediate proximity to customers. ContiTech is active in 26 countries with 75 production sites and more than 40 R&D facilities and sales organizations. The customers around the world stand to profit: Greater safety. Higher efficiency. Closer proximity.
TYMA CZ, s.r.o., is the official distributor of Continental ContiTech Power Transmission Group.
